Promx
GASGASMC 65Easy15 min

GASGAS MC 65: spark plug replacement and check

The plug is the most sensitive part of a two-stroke – its pattern tells the engine's health. Replacement takes a quarter of an hour.

The spark plug is the most critical wear part on a two-stroke engine – its colour also reveals the carburettor tune. Changing the plug on an MC 65 takes about 10–15 minutes and is worth doing regularly.

Before you start

Safety: never remove the plug from a hot engine – it can damage the cylinder head threads. Let the engine cool completely. Check the plug type and gap in the manual.

  • Clean around the plug with compressed air or a brush so dirt cannot fall into the cylinder.
  • Pull the plug cap off with a twist.

Removing and reading the old plug

  1. Undo the plug with a plug socket – never force it if it resists.
  2. Read the pattern: a dry tan colour is ideal, black and oily means rich, and white or blistered means lean.
  3. Measure the gap with a feeler gauge and compare with the manual.

Fitting the new plug

  1. Check the new plug is the correct type and undamaged.
  2. Adjust the gap by carefully bending the side electrode if needed.
  3. Screw the plug in by hand to avoid cross-threading – finish with the socket to the manual's torque.
  4. Press the plug cap on until it clicks.

Tips

  • Carry a spare plug at practice – it is cheap insurance.
  • The plug pattern reveals mixture: dark = rich, pale = lean. A lean condition leads to a hole in the piston.
  • Record the plug colour and change date in the service log.

Read also

GASGAS MC 65: spark plug replacement and check | Promx