Maintenance guides
Step-by-step maintenance and repair guides for youth motocross bikes – KTM, Husqvarna and GASGAS.

KTM
KTM 65 SX: chain and sprocket replacement
A worn drivetrain eats power and can let you down – always replace the chain and sprockets as a set.
65 SX
KTM 85 SX: gearbox oil change
Fresh gearbox oil protects the clutch and transmission – change it regularly with these steps.
85 SX
KTM 65 SX: air filter cleaning and oiling
A clean, correctly oiled air filter is the most important service job on a two-stroke – here is how to do it right.
65 SX
KTM 50 SX: brake pad replacement
Replace worn brake pads on a KTM 50 SX safely – covers both front and rear brakes.
50 SX · 50 SX Mini

Husqvarna
Husqvarna TC 85: fork dust seal and oil seal cleaning
Dirt under the dust seal kills fork seals – regular cleaning extends their life.
TC 85
Husqvarna TC 50: carburettor cleaning
A dirty carb causes running problems – thorough cleaning restores mixture control.
TC 50
Husqvarna TC 65: chain tensioning and lubrication
A correctly tensioned and lubricated chain lasts longer and transfers power cleanly.
TC 65
Husqvarna TC 85: coolant change
Fresh coolant protects the engine from overheating – change it regularly.
TC 85

GASGAS
GASGAS MC 85: piston and piston ring replacement
A two-stroke piston is a wear part – regular replacement protects the cylinder and crank.
MC 85
GASGAS MC 50: brake fluid change and bleeding
Old brake fluid absorbs moisture and ruins lever feel – change and bleed it correctly.
MC 50
GASGAS MC 65: spark plug replacement and check
The plug is the most sensitive part of a two-stroke – its pattern tells the engine's health. Replacement takes a quarter of an hour.
MC 65
GASGAS MC 85: clutch plate replacement
A slipping clutch wastes power – replacing the clutch plates on the MC 85 is a home-garage job.
MC 85